Ridge Poles and Rafters

The Guardian Fall Protection Premium Cross Arm Strap Anchorage Connector is a heavy-duty anchorage device designed to create a secure tie-off point for fall protection systems. Constructed from high-strength polyester webbing with reinforced stitching, this strap is more durable than standard models and built for repeated use in tough jobsite conditions. Each strap includes both a large and small steel D-ring, allowing for easy cinch-down installation and secure attachment of lanyards or...

The Guardian Cross Arm Strap (01620) is a durable, reusable anchorage connector that simplifies fall protection tie-off. The strap is made of reinforced polyester webbing and features both a large pass-through D-ring or loop and a small connection D-ring. Loop it around a structural anchor, pull the small D-ring through the larger loop or ring to cinch securely, then connect your lanyard or SRL. Lightweight and easy to reposition, the 6 ft strap supports single-user fall arrest and integrates...

The Moveable ARS 2x8 is a permanent, flashed roof anchor designed to mount to 2x8 top chords and stay in place for the life of the roof. It provides a low-profile tie-off point you can position to suit the shingle layout, then seal in with the included flashing kit for a clean, watertight finish. Built for single-person fall arrest or restraint with a 5,000 lb rating, it uses heavy-duty hardware for a rigid, durable connection and a molded stem cover to keep water out and the installation...

The Guardian Fall Protection Cross Arm Strap Anchorage Connector (01640) is a compact 3 ft anchorage device designed to provide a secure tie-off point for fall protection systems. Made from high-strength polyester webbing with reinforced stitching, this strap is both durable and lightweight. It features a large steel D-ring and a smaller D-ring to create a reliable connection for lanyards or lifelines. With its cinch-down installation, the 01640 can be quickly wrapped around beams, pipes, or...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Guardian Cross Arm Strap (SKU: 01625) is a versatile, reusable anchorage connector constructed with robust polyester webbing and galvanized steel D‑rings. Simply loop it over a beam or compatible structure, pass the small D‑ring through the larger one to cinch tight, and attach your lanyard or SRL. At 6 feet long and weighing around 1.7 lb, the strap enables safe tieoffs in various fall-protection applications and supports a single worker, delivering a reliable 5,000 lb minimum breaking...

The Guardian Fall Protection Cross Arm Strap Anchorage Connector (01630) is a reliable cinch-down anchorage device designed for quick and secure tie-off. Made from high-strength polyester webbing, this 4 ft strap wraps around beams, pipes, or structural members to provide a safe fall protection connection. It features one large and one small steel D-ring for easy attachment of lanyards or lifelines. Lightweight and portable, this connector installs in seconds without tools and is reusable for...

The Guardian Truss Boss Anchor Kit (00420) is a truss-mounted anchorage solution engineered for early installation during residential construction. This kit enables safe pre-placement of anchor points before roof trusses are erected, allowing instant fall protection tie-off as the truss is installed. Made from non-corrosive galvanized steel, and including flashing and a weatherproof cap, it forms a watertight seal once the roofing is installed. Lightweight and quick to install without...

The Guardian Fall Protection CB-1-B Bolt-On Wall Anchor (00600) is a permanent fall protection solution designed for use on wood, steel, or concrete wall structures. Constructed from heavy-duty galvanized steel, this anchor provides a secure tie-off point for fall arrest, restraint, or work positioning applications. The CB-1-B is designed for bolt-on installation, offering long-term durability and stability, making it ideal for both residential and commercial construction environments. Fully...

The Guardian Fall Protection Swivel Concrete Anchor (00242) is a heavy-duty, reusable anchorage connector designed for concrete surfaces. Featuring a 360° swiveling D-ring, this anchor allows lifelines, SRLs, and lanyards to rotate freely, reducing line tangling and improving worker mobility. Constructed from high-strength steel with a zinc-plated finish for corrosion resistance, the 00242 provides a reliable tie-off point for fall arrest and restraint systems. It installs quickly into cured...

The Malta Dynamics A6351 Roof Anchor features a 360-degree swivel D-ring, offering flexible and secure tie-off for fall protection systems on wood structures. This premium anchor allows the worker to move freely in any direction without compromising safety. Made from heavy-duty galvanized steel, the A6351 is built to perform in demanding environments and meets both OSHA and ANSI standards for rooftop anchorage. key words: 360° swivel D-ring provides maximum mobility while remaining tied off...

This truss anchor kit is designed for permanent installation on wood roof truss members 2 × 4 or larger. It features a 10-3/4-inch stainless steel post with an 11/16-inch connecting eye, a weather-resistant post cap with zip-tie, and a 10-inch roof flange. The kit includes stainless steel nails for installation and meets OSHA 1926.502 fall-protection anchorage requirements. Key features: 10-3/4″ stainless steel post with 11/16″ connecting eye  Weather-resistant post cap with zip-tie and...

A compact, jobsite-tough anchor strap designed to create a quick tie-off around beams, posts, or truss chords. One end features a slotted D-ring that lets the strap cinch cleanly and stay put; the opposite end uses a small D-ring for your connector. The 36-inch length is easy to route in tight spaces, and the heavy-duty webbing stands up to daily use while staying flexible for fast installs. Features 36 in overall length for tight or confined anchorage points Heavy-duty, abrasion- and...

The Guardian Fall Protection Bolt Hole Anchor (00230) is a reusable, portable anchorage connector designed for use in precast concrete or steel bolt holes. Constructed from high-strength alloy steel, this anchor installs quickly into compatible holes, creating a secure tie-off point for fall arrest, work positioning, or restraint. Lightweight and compact, it is ideal for applications where mobility and reusability are required. The 00230 provides reliable safety at height and is fully OSHA and...

A tough, 72-inch webbing anchor strap that creates a fast, reliable tie-off point around beams, trusses, columns, or other approved structures. One end features a forged D-ring for easy clipping; the other end is a reinforced loop that cinches cleanly without bulky hardware. Built for everyday jobsite abuse, it integrates into standard PFAS setups for a single user and stows compactly when the task is done. Features 72 in length provides generous wrap/anchorage options on wood, steel, or...

The Guardian Fall Protection CB-1-W Weld-On Wall Anchor (00610) is a permanent anchorage connector engineered for welding onto steel wall structures. Made from heavy-duty steel, this anchor delivers a secure and permanent tie-off point for fall arrest, restraint, or work positioning systems. Its weld-on design ensures maximum stability and durability for long-term safety solutions in industrial and commercial environments. Built for reliability under tough conditions, the Guardian 00610 CB-1-W...

A rugged, 72-inch anchor strap that creates a quick, reliable tie-off around beams, posts, and truss chords. The slotted D-ring end lets you choke the strap tight so it stays put; the opposite end provides a compact D-ring connection point for your lanyard or SRL. Built from heavy-duty 2-inch polyester webbing with forged steel hardware, it’s tough enough for daily use yet flexible for fast installs and easy stowage. Features 72 in overall length and 2 in webbing width for versatile wraps...

This anchor is intended for permanent installation on wood truss structures to provide a secure attachment point for fall-protection systems. It features a stainless-steel construction designed for long-term use and includes a fixed D-ring connection point. The anchor installs directly onto the truss and provides a reliable tie-off location for personal fall-arrest equipment. Key features: Designed for permanent installation on wood truss structures Stainless-steel body for long-term...