Modified Bitumen Tools

Built for clean, controlled pressure in tight detail areas, the MR05020 pairs a compact silicone roller with a durable frame to deliver uniform, non-marring results on single-ply membranes and flashing. Its smaller width excels along seams, upstands, and corners, while the smooth-rolling bearings help you track straight lines without chatter or scuffing.Key Features Non-marring silicone roller — resists heat and common roofing solvents while protecting finished surfaces. Compact size for...

A time-saving combo tool that lets you roll and immediately test your seam without swapping tools. The MR05032 pairs a heat-resistant silicone roller with a built-in seam tester so you can verify weld integrity in one continuous pass. Its extended offset fork improves line-of-sight and keeps your hand farther from the heat source, while the cushion-grip handle and smooth bearings deliver steady, low-drag rolling on TPO, PVC, and EPDM.Key Features All-in-one roller + tester: Roll the seam, then...

Everhard MR05028 Ergonomic Silicone Roller This compact, non-marring silicone seam roller is built for precise work on single-ply membranes and flashing. The extended offset roller keeps hardware out of the contact path for smoother tracking and better visibility along edges, upstands, and tight detail areas. A cushioned, ergonomic handle reduces hand fatigue while precision bearings help deliver uniform pressure and a professional finish.Key Features 1-7/16 in diameter × 1-3/4 in width...

The Everhard MR05029 is a high-quality, U.S.-made silicone roller optimized for right-handed roofers. Its heat-resistance, ergonomic handle, extended offset fork, and smooth bearings make it a top-tier tool for precision seam finishing, especially under hot-air applications.Key Features Ergonomic Advantage: Extended offset fork provides greater knuckle clearance—reducing wrist strain and enhancing visibility in confined or angled work areas  Right-Handed Design: Tailored specifically for...

MUNK® Chore glove with 2 ply quilted palm is lined with rayon for comfort and warmth. The rubberized waterproof safety cuff offers extended wrist protection. Elastic band on back for a flexible fit. Breathable cotton back for ventilation. Two Ply Quilted Palm for Longer Wear Rayon Lined for Added Comfort and Warmth Rubberized Waterproof Safety Cuff Flexible Elastic Band Breathable Back Color : Gold/Green Size : Large ...

The MR02150 pairs a polished, radius-edge steel wheel with a sturdy offset frame to deliver firm, even pressure without leaving sharp track lines. The rounded profile helps the roller glide cleanly over laps, step-downs, and transitions, while enclosed bearings keep the action smooth for consistent seam consolidation on TPO, PVC, and EPDM systems.Key Features 2″ diameter × 2″ wide polished steel radius roller minimizes edge/track marks on membranes High, uniform compression ideal for long...

FEATURES Double-end combination seam roller and penny rollerDouble fork with enclosed bearings1½" diameter x 1¾" wide silicone roller and 1⅛" diameter x 0.20" wide brass penny roller5" birch wood handle

The RACE High Speed Seamer attaches to any 3/8 in or larger drill to deliver faster, superior finished seams. It comes with high-quality urethane rollers and includes two shaft lengths (4 in and 12 in). The body is constructed from cast aluminum. Key features: Fits on any 3/8 in or larger drill Provides superior finished seams more easily and quickly Includes two shaft lengths (4 in and 12 in) Equipped with high-quality urethane rollers Body made of cast aluminum ...

Built for broad, even compression on long runs, the MR02090 pairs a 4″ wide polished steel wheel with a rugged frame and smooth, enclosed bearings. It tracks cleanly across laps, step-downs, and terminations, giving you the firm feedback of steel without chatter. A comfortable 5″ handle provides control and knuckle clearance near edges and walls, making this a go-to roller for TPO, PVC, and EPDM work. Key Features 4″ wide polished steel roller delivers strong, uniform pressure for faster...

Built for smooth finishing with a wider contact line, the MR08580 uses a 1/4″ rounded (convex) steel wheel to deliver even pressure without imprinting sharp track lines. The curved edge lets you blend seams, patches, and step-downs cleanly, while a rigid frame and enclosed bearings keep the roll precise and chatter-free on TPO, PVC, and EPDM. Key Features 1/4″ rounded/convex steel wheel spreads pressure for faster blending and fewer visible edge marks Ideal for dressing long seams,...

The MR02140 delivers firm, even pressure for strong seam consolidation on single-ply membranes and flashing. Its 2″ diameter × 2″ wide polished steel wheel tracks cleanly along laps and transitions, while the offset frame and smooth, enclosed bearings help you apply consistent compression without chatter. Built for daily jobsite use, it’s a dependable choice when you want the feel and feedback of a solid steel roller. Key Features 2″ diameter × 2″ wide polished steel roller provides...

The Rooftop Equipment WR-150-FB Fleeceback Roof Membrane Roller is a 150 lb heavy-duty roller designed for use with fleeceback and other thick roofing membranes. Engineered to deliver consistent, even pressure, it ensures complete adhesive contact across the membrane surface for a professional, wrinkle-free finish. Built from durable steel with a wide balanced frame, this roller provides smooth movement, stability, and precision. Ideal for fleeceback installations, the WR-150-FB reduces labor...

Built for stability and high, even pressure on long runs, the MR02100 pairs a wide 2″ × 4″ polished steel wheel with a rigid double-fork frame. The twin-fork support keeps the axle square under load so the roller tracks straight across seams, step-downs, and terminations. Enclosed bearings deliver a smooth, chatter-free feel, while the comfortable 5″ handle gives you confident control on verticals and edges. It’s a jobsite-ready workhorse for TPO, PVC, and EPDM applications where the firm...

The Select Leather Double Palm Safety Cuff Glove (#1270P, Item # 337-1005SDP) features a doubled leather palm for enhanced wear resistance, a safety cuff for wrist protection, and a leather knuckle strap for added support. Constructed in select grade leather for durability. Key features: Double leather palm design Safety cuff for wrist protection Leather knuckle strap Select grade leather construction

The Flame Engineering Red Dragon SPA-740A is a roll-mounted modified bitumen applicator designed for torch-applied membrane installation. It features a multi-burner system with adjustable torches mounted on a mobile frame, allowing controlled and consistent heating across the width of the roll. This applicator is used in commercial roofing to apply modified bitumen membranes efficiently. The adjustable manifold and roll-mount design allow the operator to control torch positioning and heat...

The RACE Wood Handle Seam Probe (SP-01) is made for inspecting and testing seam welds on single-ply, bitumen, or TPO roofing assemblies. It features a plated steel probe of 3½″ in length mounted on an 8″ hardwood handle. The tool is designed to provide a comfortable grip while delivering precise tactile feedback to detect seam flaws. Key features: 3½″ plated steel probe 8″ hardwood (wood) handle Designed for seam and weld testing Lightweight and easy to use Balanced for control and accuracy ...

Built for versatility and control, the MR05270 pairs a compact, non-marring silicone wheel with a convertible, threaded handle so you can switch from precise hand work to comfortable stand-up rolling in seconds. The single-fork frame keeps hardware out of the contact path, while enclosed bearings deliver smooth, even pressure along seams, laps, and transitions on single-ply membranes. Key Features 2″ diameter × 2″ wide silicone roller for clean, uniform compression on TPO/PVC/EPDM seams. ...

The Rooftop Equipment 100MR Roof Membrane Roller is engineered to apply consistent pressure across roofing membranes for secure bonding and professional results. Weighing 100 lbs, this heavy-duty roller is ideal for use with single-ply and modified bitumen roofing systems. Its durable construction and balanced frame provide smooth rolling performance and uniform surface contact, helping eliminate air pockets and wrinkles during membrane installation. Designed for commercial roofing...

Stand-up Embedder Torch Kit EBK-2 This stand-up kit allows the roofer to quickly and consistently embed granules without kneeling. This tool is efficient and a real back saver. Remove the EBT-00 for use as a torch. Perfect for those hard to reach places. The kit includes a fully adjustable and removable embedding tool with handle attachment Large steel roller for excellent coverage and even penetration of granules Creates a Smooth Under Lap Surface Remove the embedding tool and handle...

By customer request we are offering a new wagon similar to a competitor’s model. The older style two handle design modernized by Red Dragon technology. Features include a stainless steel manifold and framework and 7 durable vapor torches. Each torch has a flame adjusting needle valve for total flame control and the manifold easily moves to and from the roll. Lighter weight than the competition and American made. Manifold easily moves to and from the roll. Apply 3/4, 1, 1-1/2 square rolls. For...

Everhard MR02153 Wrist-Saver Steel Radius Seam Roller — 2" x 2" The MR02153 combines Everhard’s Wrist-Saver offset geometry with a 2" x 2" polished steel radius roller to deliver high, even pressure without edge marking. The radius profile helps the roller glide over laps, transitions, and step-downs while the offset frame improves line-of-sight and keeps your wrist in a more neutral position. Enclosed bearings and a cushioned handle give you smooth, controlled tracking for long runs and...

The Flame Engineering Red Dragon SPA-540A is a roll-mounted modified bitumen applicator designed for torch-applied membrane installation. It features a five-torch configuration mounted on a mobile frame to provide consistent heat across the roll during application. This applicator uses an adjustable manifold and Easy-Roll mount system to control torch position and flame angle while advancing the membrane. It is used in commercial roofing where controlled heat distribution and steady roll...

Ultimate Repair KitSievert URK-4 Ultimate Repair Kit includes Hot-Air Torch System for Modified Bitumen and Single-Ply Roofing. Promatic Handle and 2 burners (single ply and Bitumen types) for complete repair flexibility. The most convenient repair kit available for repairing modified bitumen and single ply roofs. Kit contains one handle and two burners providing repair crews the ultimate in flexibility. Kit Includes: (1) Siever-Matic S handle and 2 different burners for complete...

Compact and lightweight, the EAGLE 2000-V42MB simplifies seam bonding in corners, around equipment protrusions, and in other tight, hard-to-weld areas. The unit fits comfortably in your hand and is a rugged and powerful heat gun with the heat output to weld modified bitumen details. The EAGLE 2000-V42MB has a 4200 watt heat element and is designed for 230v operation. It is also double insulated and ISO color coded for added electrical safety. ...

Popular kit that features a powerful, windstable flame. Handle has dual control knobs for ”complete” flame control. Piezo ignition. 500K BTU/hrA superior torch designed to provide reliability and dependability for all of your modified membrane roofing applications.Kit Includes:(#3470-48) 32” Torch assembly with stand (#1525IS) 25 ft. U/L listed hose (#3062-93) U/L listed hand tightened regulator

Primegrip offers an extensive line of silicone and steel membrane seam rollers in a wide variety of sizes. FEATURES Heat-Resistant Silicone Seam RollerUsed To Compress Roof Membranes When Effecting Seal/JointL-Shaped Offset Fork Forms An Ergonomic Design That Drastically Reduces Wrist Fatigue1½″ Diameter X 1¾″ Width4.5″ Birch Wood Handle

The RACE Automatic Bitumen Roofing Welding Machine is designed for flame-free hot-air welding of SBS and modified bitumen membranes. It uses a 4200-watt heating system and brushless motor to provide smooth, consistent welding performance. The unit features variable speed and temperature controls with digital adjustment for precision operation. Key features: Flame-free hot-air welding system 4200W heater with digital temperature control Adjustable temperature range from 50 °C to 700 °C Variable...

The BAK LarOn Modified Bitumen Automatic Welding Machine is an automatic hot-air welder built for modified bitumen roofing applications. It features a chain-driven system and brushless motor for consistent performance during continuous welding operations. Constructed with a lifetime-milled aluminum frame, the unit is designed for stability and durability on commercial roofing jobs. The kit includes the necessary accessories to begin welding modified bitumen membranes. Key Features Designed for...