Products 1-17 of 17
Show
5 ft. Metal Flex Hose
1 1/2" Male Fitting On One End
Price: $81.95
Availability: In Stock
RACE Item #: 277-1015 -

    This 5 ft metal flex hose is listed as a kettle accessory for roofing equipment. It includes a 1½-inch male fitting on one end. The item is shown with product number 277-1015 on the Big Rock Supply page. Key features: 5 ft length Flexible metal hose construction 1½-inch male fitting on one end Roofing kettle accessory Listed as item 277-1015

    Equipment Thermometer - Model E - 3" Dial
    For Most Equipment and Tanker Specs, 4" - 24" Length
    Price: $46.65
    Availability: In Stock
    Marshall Instruments

      For most equipment and tanker specifications 1/2" thread fitting Sizes: 4”, 6”, 12”, 18” & 24”

      1 1/2 in. Hammer-On Union
      2000 # Test, Full Cast Construction
      Price: $29.95
      Availability: In Stock
      RACE Item #: 275-1020 -

        The RACE 1½ in Hammer-On Union is a full-cast fitting built to withstand pressures up to 2000 psi. It follows the standard Figure 200 style and is designed for reliable wrench-type installation. This durable union is suited for heavy-duty connections in piping and kettle systems. Key features: Full-cast construction Rated to 2000 psi Standard Figure 200 style Designed for hammer-on / wrench installation 1½ in nominal size ...

        Hand Held Inspectors Thermometer
        Wood Handle
        Price: $66.05
        Availability: In Stock
        Marshall Instruments Item #: 363-1150 -

          15" stem length Wood handle and clip

          Sale!
          RACE 5 Gallon Asphalt Carrying Bucket
          Price: $119.00
          Availability: In Stock
          RACE Item #: RACE-5GAP -

            Steel RACE 5 Gallon Asphalt Carrying Bucket includes a round bottom to prevent sticking to roof surfaces. It features a “D” style lower handle and a heavy ball top handle that resists falling against the bucket side. Key features: All-steel construction Round bottom to avoid asphalt sticking “D” type lower handle Heavy ball top handle that cannot fall against bucket side

            Hot Pipes
            2 inch thin wall pipe tubing
            Price: $107.72
            Availability: In Stock
            RACE

              Hot Pipes thin wall tubing provides a lightweight 2-inch tube option designed for use with 1½-inch threaded nipples. It offers a consistent diameter and smooth interior for easy assembly. Available in multiple lengths for different installation needs. Key features: 2-inch thin wall tubing design Compatible with 1½-inch threaded nipples Smooth interior for consistent assembly Available in 5 ft, 10 ft, 15 ft, and 20 ft lengths ...

              ACRO 1010 Bucket Bail - Heavy-Duty Steel Brackets for Hot...
              Adjustable to fit different diameter pails
              Price: $30.65
              Availability: In Stock
              Acro Building Systems Item #: 427-1010 -

                The ACRO 80000 Roofing Bucket Bails are durable, steel support brackets engineered to securely hold hot tar roofing buckets in place during application. Designed for use with ACRO’s proprietary hot tar buckets, these bails provide a reliable and hands-free solution to managing buckets on steep roof pitches or uneven surfaces. Their robust steel construction withstands rigorous jobsite use while streamlining roofing operations by reducing the need for workers to manually handle buckets during...

                ACRO 70072 Kettle Skimmer - 72" Steel Handle
                Heavy duty construction allows for many years of use. Skim debris from inside kettle.
                Price: $132.00
                Availability: In Stock
                Acro Building Systems Item #: ACRO-70072 -

                  The ACRO 70072 kettle skimmer offers contractors a safe, long-reaching solution for removing debris from hot tar, asphalt, or bitumen kettles. Equipped with a 72″ long steel handle, it keeps users well away from extreme heat while providing exceptional leverage and control. The generous 10″×12″ × ½″ blade ensures effective skimming across the kettle surface. Crafted for durability, this heavy-duty tool helps maintain material purity, reduce fire risk, and keep jobsite operations moving...

                  Flame Engineering Red Dragon - 567RD- 0-100 PSI Adjustable...
                  gas regulator
                  Price: $63.87
                  Availability: In Stock
                  Flame Engineering Item #: 477-567RD -

                    The Flame Engineering Red Dragon 567RD is a high-pressure adjustable propane gas regulator designed for use with roofing torches, tar pot heaters, weed burners, and other high-demand applications. It delivers precise pressure control from 0 to 100 PSI, making it suitable for a wide range of jobsite conditions. This regulator is built for cylinder systems using either liquid or vapor LP gas and features a compact, medium-capacity design with consistent regulating performance. It includes a...

                    RACE - Premium Liquid Propane Hose, 350 PSI
                    Durable and flexible 1/4" LP hose with 9/16" left-hand swivel nuts. Made in the USA,...
                    Price: $79.95
                    Availability: In Stock
                    RACE

                      The RACE Premium LP Hose is designed for propane delivery in roofing and construction use. It features a ¼″ inner diameter, 350 PSI working pressure, and is UL21 and CGA Type I compliant. The hose includes 9/16″ left-hand swivel nuts on both ends for a secure connection and multi-ply textile reinforcement for kink resistance. Key features: 350 PSI maximum working pressure ¼″ inner diameter UL21 and CGA Type I compliant 9/16″ left-hand swivel fittings on both ends ...

                      1 1/2 in. Ward Union
                      Standard Wrench Type Union
                      Price: $30.95
                      Availability: In Stock
                      RACE Item #: 275-1010 -

                        The RACE 1½ in Ward Union is a standard-wrench union sized for kettle and plumbing connections. It is constructed of malleable iron with a brass and iron seat to provide a secure, durable seal. The union uses a black finish and is suited for Class 150 applications. Key features: Standard wrench-type union design Made of malleable iron with brass/iron seating Black finished body for corrosion resistance Designed to join two pipe ends securely Suitable for kettle and plumbing fitting...

                        Kettle Lid, Hood and Deck Gasket Material
                        Roll of Silicone Rubber (1" x 1/8" x 30')
                        Price: $66.15
                        Availability: In Stock
                        RACE Item #: 225-1015 -

                          Roll of silicone rubber listing tape in dimensions 1" x 1/8" x 30' serves as gasket material for kettle lids, hoods, and decks. Key features: Silicone rubber gasket material in listing tape form Rolls measure 1" width × 1/8" thickness × 30' length Suitable for kettle lids, hoods, and deck gasketing Item number 225-1015

                          RACE - Steel Pipe Nipples with Spacing for Wrench, Male...
                          Kettle accessories, steel pipe nipple
                          Price: $1.95 - $9.95
                          Availability: In Stock
                          RACE

                            RACE steel pipe nipples feature spacing for a wrench and male ends. Each fitting is independently lab verified to meet applicable chemical and physical properties, is 100% air tested, and is FM approved at 300 lbs. Available sizes include 1½ inch by 4 inch and 1½ inch by 6 inch. Key features: Spacing for wrench with male ends Independent lab verification of applicable chemical and physical properties 100% air tested FM approved at 300 lbs Offered in multiple lengths for kettle accessory use ...

                            ACRO 70026 Heavy-Duty Steel Kettle Skimmer - 40" Handle
                            Heavy duty construction allows for many years of use. Skim debris from inside kettle.
                            Price: $110.00
                            Availability: In Stock
                            Acro Building Systems Item #: ACRO-70026 -

                              The ACRO 70026 kettle skimmer is a professional-grade accessory featuring a 40″ steel handle attached to a 10″ × 12″ skimming blade—crafted for effective removal of debris from hot tar, asphalt, or bitumen kettles. Its long, sturdy handle ensures safe distance from heat, improving user control during operation. Engineered for durability with heavy-duty construction, the skimmer efficiently clears kettles to reduce fire risk and maintain material consistency across jobsites, providing a...

                              5' Hot Pipe
                              2 inch thin wall pipe tubing
                              Price: $50.00
                              Availability: In Stock
                              Panther Products Item #: P-HP01 -

                                2 inch thin wall tubing Used with 1-1/2 inch threaded nipple

                                A & A Melters HMP-50 Hot Material Packer – 50 Gallon...
                                A & A Melters HMP-50 Hot Material Packer: A 50-gallon, fully insulated carrier designed...
                                Price: CALL
                                Availability: In Stock
                                A & A Melters Item #: AAS-HMP-50 -

                                  The A & A Melters HMP-50 Hot Material Packer is a 50-gallon insulated carrier made to transport and maintain the temperature of hot roofing material in areas where a kettle cannot be placed. It’s built as a standalone unit and is designed to be lifted into elevated or tight-access locations, including rooftops, using a crane. Optional factory modifications are available to convert the unit into a material applicator. Key Features Fully insulated shell to retain material temperature during...

                                  A & A Melters HMP-100 Hot Material Packer – 100 Gallon...
                                  A & A Melters HMP-100 Hot Material Packer: A robust, 100-gallon insulated carrier...
                                  Price: CALL
                                  Availability: Out of Stock
                                  A & A Melters Item #: AAS-HMP-100 -

                                    The A & A Melters HMP-100 Hot Material Packer is a 100-gallon insulated carrier engineered to transport and maintain the temperature of hot roofing materials into locations where traditional kettles cannot be used. Its fully insulated vessel helps preserve material heat during movement and placement. This unit is crane-compatible for efficient delivery of hot material to elevated or confined work areas such as rooftops or hard-to-reach spaces. Key Features 100-gallon insulated container for...

                                    Best Sellers

                                    Sale!
                                    RACE 5 Gallon Asphalt Carrying Bucket
                                    Price: $119.00

                                    Steel RACE 5 Gallon Asphalt Carrying Bucket includes a round bottom to prevent sticking to roof surfaces. It features a “D” style lower handle and a heavy ball top handle that resists falling against the bucket side. Key features: All-steel construction Round bottom to avoid asphalt sticking “D” type lower handle Heavy ball top handle that cannot fall against bucket side

                                    RACE - Premium Liquid Propane Hose, 350 PSI
                                    Durable and flexible 1/4" LP hose with 9/16" left-hand swivel nuts. Made in the USA,...
                                    Price: $79.95

                                    The RACE Premium LP Hose is designed for propane delivery in roofing and construction use. It features a ¼″ inner diameter, 350 PSI working pressure, and is UL21 and CGA Type I compliant. The hose includes 9/16″ left-hand swivel nuts on both ends for a secure connection and multi-ply textile reinforcement for kink resistance. Key features: 350 PSI maximum working pressure ¼″ inner diameter UL21 and CGA Type I compliant 9/16″ left-hand swivel fittings on both ends ...

                                    5 ft. Metal Flex Hose
                                    1 1/2" Male Fitting On One End
                                    Price: $81.95

                                    This 5 ft metal flex hose is listed as a kettle accessory for roofing equipment. It includes a 1½-inch male fitting on one end. The item is shown with product number 277-1015 on the Big Rock Supply page. Key features: 5 ft length Flexible metal hose construction 1½-inch male fitting on one end Roofing kettle accessory Listed as item 277-1015

                                    1 1/2 in. Hammer-On Union
                                    2000 # Test, Full Cast Construction
                                    Price: $29.95

                                    The RACE 1½ in Hammer-On Union is a full-cast fitting built to withstand pressures up to 2000 psi. It follows the standard Figure 200 style and is designed for reliable wrench-type installation. This durable union is suited for heavy-duty connections in piping and kettle systems. Key features: Full-cast construction Rated to 2000 psi Standard Figure 200 style Designed for hammer-on / wrench installation 1½ in nominal size ...

                                    Leave a message