Residential Roofing

'The Work Horse', Devours Anything in its Path Removes: Asphalt, fiberglass, asbestos, slate, cedar and tin 48" Length The Blade: Wide-base hardened steel alloy grasps under more of the materials being removed thus allowing you to salvage reusable materials

The Shingle Eater 6126 Original is an American-made roofing tear-off tool designed for asphalt shingle removal. It features a 55-inch handle that provides reach and leverage, along with a 10-inch wide footplate equipped with 10 corrugated steel teeth that help remove shingles and nails efficiently. Weighing 7.4 lbs, the tool is built with durable all-steel construction, a heat-tempered foot plate, and a powder-coated finish for long-term performance. It is designed to deliver reliable results...

The AJC 118-DD Double Dipper Shingle Remover is designed for high-efficiency roofing tear-offs, combining durability, leverage, and operator comfort. Its 20-inch serrated blade is built from heavy-duty steel, delivering aggressive cutting and prying power to remove shingles, nails, and roofing materials with ease. The dual-handle design with poly D-grips gives contractors maximum leverage and control, reducing fatigue while increasing productivity. Built to handle demanding job site...

The Shingle Eater 6127 Steep Slope is an American-made roofing tear-off tool designed for use on steeper pitched roofs and for users under six feet tall. It features a 46.5-inch handle and a 10-inch wide footplate equipped with 10 corrugated steel teeth. The tool is finished in OSHA Safety Yellow and built with all-steel construction meant to support asphalt shingle removal. Key features: 46.5-inch handle tailored for steeper pitched roofs and users under six feet tall 10-inch wide footplate...

The ACRO 26906 Roof Bracket is a contractor-grade support bracket set at a 90° angle, equipped with a 16″ back plate for use with structurally sound 2×6 lumber planks. Designed for safety and durability, it includes four offset nail slots—exceeding OSHA’s requirement—to prevent upward movement, a robust back-stiffening rib to resist twisting and flexing, and smooth, rounded edges to protect hands and roof surfaces. The powder-coated safety-yellow finish improves visibility and holds up under...

The ACRO 19700 Johnny Jack Offset Roof Bracket is a specialized staging solution for steep-pitch roofing installations involving interlocking materials such as slate, tile, metal shingles, and asphalt. Featuring a 7‑foot flat bar that offsets the walking surface from the attachment point, it delivers a safe, accessible work platform with 5½‑in surface clearance—keeping anchor screws exposed and reachable. The system folds compactly to 48″ for convenient transport and storage, and its...

This adjustable slaters bracket offers six locking positions and a 10" platform. It is built from heavy-duty galvanized steel and can be repositioned and taken down without damaging shingles. The bracket folds flat for transport and features a replaceable 3-position tongue. Key features: 6-position locking adjustments Heavy-duty galvanized steel construction 10" platform Folds flat for storage and transport Replaceable 3-position tongue ...

The ACRO 26606 Roof Bracket is a contractor-grade support bracket set at a 60° angle, featuring a 16-inch back plate optimized for use with structurally sound 2×6 lumber planks. It is engineered with four offset nail slots, surpassing OSHA’s three-slot minimum, providing resistance against upward shift. The bracket includes six long welds and a back-stiffening rib to resist twisting and flexing, plus smooth rounded edges that protect hands and roofing surfaces. Its durable powder-coated safety...

The Shingle Eater 8126 Renovator Tall Demo Eater is an American-made roofing tear-off and demolition tool designed for heavy duty use. It features a 55″ angled handle for leverage and control, and a 10″ wide footplate with 10 corrugated steel teeth and a 90-degree weld angle for enhanced striking and prying power. Reinforced with gussets and built to manage multiple layers of shingles, rotten decks, or jobsite surprises, this tool is engineered to slide under materials and improve efficiency....

The ACRO 26904 Roof Bracket is a contractor-grade, 90° support bracket with a 16-inch back plate, designed specifically for use with structurally sound 2×4 lumber planks for roofing staging. It includes four offset nail slots—exceeding OSHA’s requirement for three—to prevent upward slipping, six extended welds and a back-stiffening rib to resist twisting or flexing, and a welded gusset for added strength. Finished with smooth, rounded edges to protect hands and roofing surfaces, and...

The ACRO 26456 Roof Bracket is a contractor-grade, 45∘ angled support bracket with a 16" back plate, designed for use with sound 2×4 or 2×6 lumber scaffolding planks. It enhances safety with four offset nail slots—a number that exceeds OSHA’s requirement of three—to prevent upward sliding. For structural integrity, the bracket features six long welds and a back-stiffening rib to resist twisting and flexing under load. Its smooth, rounded edges are specifically designed to protect both the...

The ACRO 29606 Roof Bracket is a rugged, contractor-grade support designed at a 60° angle with a generous 19″ back plate tailored for use with structurally sound 2×6 lumber. It exceeds OSHA safety standards with its four offset nail slots to prevent upward slippage, supplemented by six long welds, a back-stiffening rib, and welded gusset to reinforce structural integrity. With rounded, smooth edges that protect both hands and roofing materials and a high-visibility, powder-coated safety-yellow...

The Shingle Eater 6128 Short & Narrow is an American-made roofing tear-off tool engineered for tight or steep areas such as small garages, between peaks, or near gutters. It features a 36.5-inch handle and a 7-inch wide footplate with 7 corrugated steel teeth to help remove shingles and nails in confined spaces. Built with 100% all-steel construction and finished in OSHA Safety Yellow, it offers durability and maneuverability for specialty roofing tear-off scenarios. Key features: 36.5-inch...

The Shingle Eater 6130D Steep Slope D-Handle is an American-made shingle removal tool designed for steeper pitched roofs. It features a 46.5-inch length and a steel D-handle grip built to give better leverage, combined with a 10-inch wide footplate equipped with 10 corrugated steel teeth for effective shingle and nail removal. The tool is built with rugged all-steel construction, designed to slide easily under shingles and deliver accurate tear-off performance. Key features: 46.5-inch handle...

The ACRO 29456 Roof Bracket is a robust, contractor-grade 90° support bracket with a 19-inch back plate, designed for use with structurally sound 2×4 lumber. It features four offset nail slots—exceeding OSHA’s minimum requirement—plus a welded gusset and back-stiffening rib to resist twisting and flexing. With smooth, rounded edges to protect hands and roofing surfaces and a powder-coated safety-yellow finish for visibility and durability, this bracket installs and removes cleanly without...

The RACE Adjustable Roof Bracket is a steel staging bracket with a 10-inch platform and selectable angles of 30°, 45°, 60°, or 90°. It supports one worker per 8 feet of bracket spacing or up to 250 pounds of materials. The bracket must be nailed securely to roof rafters using all mounting slots for proper installation. Key features: 10" platform with adjustable angle settings Four positions: 30°, 45°, 60°, 90° Steel construction for durability Rated for one worker or up to 250 lbs of material...

The Shingle Eater 8130D Demo Eater D-Handle is an American-made shingle removal tool designed for renovation and heavy tear-off jobs. It features a wide steel D-shape handle (over 6″ wide) and a 53″-54″ length steel pipe grip for enhanced control and leverage. The footplate comes with 10 corrugated steel teeth and a reinforced fulcrum with a 90° strike angle, built to slide under shingles and deliver higher prying force. Its approximately 8.5 lb weight is balanced to optimize sliding and...

The ACRO 29608 Roof Bracket is a contractor-grade, 60° angled support bracket with a generous 19″ back plate, specifically designed for use with structurally sound 2×8 lumber planks. It includes four OSHA-compliant offset nail slots to prevent upward slippage, reinforced with six long welds, a back-stiffening rib, and a welded gusset to provide exceptional strength and resistance to twisting or bending. The bracket’s smooth, rounded edges protect hands and roofing materials, and its...

The ACRO 29908 Roof Bracket is a contractor-grade support bracket set at a 90° angle, featuring an extended 19″ back plate designed for structurally sound 2×8 lumber planks. It includes four offset nail slots—surpassing OSHA’s minimum specification—for secure attachment. Built for robustness, it incorporates a back-stiffening rib and welded gusset to resist twisting and flexing. Smooth, rounded edges safeguard hands and roofing surfaces while allowing shingle-safe installation and removal. The...

The ACRO 2″ × 10″ 90° Roof Bracket with 19″ back length is a heavy-duty, contractor-grade staging support designed to hold structurally sound 2×10 lumber planks. It exceeds OSHA standards with four offset nail slots that prevent upward slippage and is reinforced with a back-stiffening rib, six long welds, and a welded gusset for maximum strength. Smooth, rounded edges protect both workers and roofing materials, while the safety-yellow powder-coated finish ensures high visibility and resistance...

The ACRO 29904 Roof Bracket is a contractor-grade 90° support bracket with a 19″ back plate designed for use with structurally sound 2×4 lumber planks. It includes four offset nail slots that exceed OSHA’s three-slot requirement, ensuring secure placement and preventing upward slippage. Reinforced with six long welds and a back-stiffening rib, the bracket resists twisting and flexing while maintaining structural integrity. Smooth, rounded edges protect roofing surfaces and workers’ hands,...

The RACE Fixed Roof Bracket is a rigid scaffold bracket designed to mount perpendicular (90°) to the roof surface for staging and slide guard use. It is intended for roofs with pitches between 4/12 and 6/12 and must be spaced no more than 8 feet apart when used as part of a slide guard system. The bracket is built for experienced tradesmen and requires appropriate fall protection and compliance with OSHA standards for use. Key features: Fixed 90° orientation to roof surface Designed for slide...

The RACE Fixed Roof Bracket is a rigid scaffold bracket configured at a 45° angle, suited for use on steep (12/12 pitch) roofs. It is rated to support one worker and a load of materials in compliance with staging guidelines. The bracket features rounded corners to minimize shingle damage and requires experienced handling and adherence to fall protection rules. Key features: Fixed 45° orientation for steep roof (12/12 pitch) use Rounded corners to reduce shingle damage Rated for one worker plus...