Permanent Anchor for 24 Gauge or Thicker Corrugated Metal Decking with Ribs 10" to 20" Apart and 5/8" or Thicker CDX Plywood or Concrete
During a fall when the roof top anchor is loaded, the stanchion tips-over properly distributing the fall arrest forces to the base and fasteners. This provides added safety to the worker attached and distributes the forces to the structure. By limiting the forces this way, the integrity of the roof is also preserved. Because of its “tip-over” design, the anchors can be attached to the roof structure without needing to attach or fasten to a structural membrane.
Rating for Fall Arrest / Single Use
Simply attach your shock absorbing lanyard, self retracting lifeline or rope grab and lifeline or install a Sayfline™ horizontal lifeline system between two anchors providing a safe tie-off point for two workers. **The horizontal lifeline system may only be used when the roof anchor is fastened to the structure using the optional rivet kit or Fablock Fasteners.**
Can be directly fastened to the roof panels with rivets, tek screws or lag bolts
Waterproof when used with aluminum rivets and mastic
Minimum material thickness for steel decking is 22 gauge. The minimum for plywood is 5/8"
Size: Small Base: 14" x 16 1/2", Height to top of D-ring: 12 1/2"
Large Base: 14" x 20 1/2", Height to top of D-ring: 12 1/2". Capacity: 310 lbs.
Optional Rivet Kit and Rain Collar (Please Call for Pricing)
Meets OSHA, ANSI Z359.1, CSA Z259.16, AS/NZ S1891.4 part 2 & 4 and EN 795 class A
Roof Panel Types: #2100070 & 2100071 Fits Type B wide rib, Type F intermediate rib, 1 ½” composite, 2” composite, R panel, Type A deck, Type B inverted form, Type S deck, ¾” or larger CDX plywood sheathing. #2100071 also fits N deck
|
