Specials

RACE Perimeter Warning Flags provide a visual boundary for hazardous areas with a 105 ft flagged line. The standard version uses 3 mil HDPE triangle flags, while the heavy duty version uses 6 mil material. Flags space is 22 inches apart. Rated for 500 lb break strength and compliant with EM385-1-1 and OSHA standards. Key features: 105 ft long warning line for perimeter demarcation Triangle flags 18" × 12" made of HDPE Flags spaced 22" apart 500 lb OSHA compliant break strength ...

These contractor clean-up bags are built with heavy-duty 3 mil thickness to withstand rigorous jobsite use. Each bag has a 42-gallon capacity with dimensions of 32″ × 50″. The package contains 20 black bags designed for contractor, commercial, or home cleanup needs. Key features: Heavy-duty 3 mil gauge material 42 gallon capacity Bag dimensions 32″ × 50″ 20 bags per pack Strong enough for construction and commercial use ...

These contractor clean-up bags are made of heavy 3 mil gauge polyethylene for durability under demanding use. Each bag measures 32" x 50" and holds up to 42 gallons of waste. The 50-count pack is designed for contractors and commercial users to handle large debris loads. Key features: Heavy 3 mil gauge material for strength 42 gallon capacity Size 32" x 50" Pack contains 50 bags Black color design

Make bold, legible layout marks that survive the jobsite. Keson lumber crayons deliver dense, high-contrast lines on rough materials—framing lumber, OSB/plywood, concrete forms, masonry, and steel. The durable wax/ pigment blend resists crumbling, won’t wash out at the first hint of moisture, and glides smoothly for fast, consistent marking. Sized to fit standard crayon holders and pockets, they’re the everyday staple for framers, carpenters, masons, and fabricators. Key Features...

The Big Rock Supply Blue Tarp (Light Duty) is a woven polypropylene tarp with 5-6 mil thickness designed for general-purpose coverage. It features a 10 × 8 weave, reinforced patched corners, hemmed edges with polypropylene rope, and aluminum rustproof grommets spaced every 3 feet for secure tie-down. This tarp is coated to resist water, mildew, and rot. Key Features Woven polypropylene 10 × 8 fiber pattern Thickness of 5-6 mil Reinforced patched corners Hemmed edges with polypropylene rope...

This roofing warning line system features a 30 lb recycled rubber base and a 43″ safety cone, designed for quick setup and removal. The cone includes an ergonomic handle for carrying, and the system meets the 39″ maximum tie-off height required by OSHA 1926.502. The cone is made of low-density polyethylene plastic for durability, while the base has a smooth texture to prevent damage to roof membranes. Key features: Quick setup and removal of warning system 30 lb recycled rubber base that stays...

Tubos are high-performance, prefabricated plumbing vent pipe extensions, designed to simplify and accelerate plumbing stack extensions during re-roofing. Featuring a 6-inch integrated joint splice sleeve at each end, Tubos can be easily cut to extend two vent stacks, offering the fastest, strongest, and most cost-effective solution for vent pipe modifications. Features and Benefits:Installs in three easy steps: Measure, Cut length, seal in place with caulkCompatible with both Cast Iron and PVC...

This clear, greaseless gel is used to prevent pitch burn by creating a barrier on the skin that keeps pitch dust from contacting the body. It’s water soluble and comes in a 5.5 oz tube. Key features: Clear and greaseless gel Creates a barrier to block pitch dust from skin Water soluble 5.5 oz tube Packaged 24 per box

This green heavy-duty poly tarp features a 12 mil thickness and a 12×14 weave for strength. It has reinforced patched corners, aluminum rust-proof grommets spaced every 3 feet, and sun, fade, and UV resistance. Multiple sizes are available. Key features: 12 mil thickness; special 12×14 weave for added strength Tear-resistant with reinforced patched corners  Aluminum, rust-proof grommets every 3 feet  Sun, fade, and UV resistant  Sizes available from 8′×10′ to 40′×60′ (80–2400 sq...

Fall Protection Distributors LLC, brings you a revolutionary product allowing Homeowners, Building Owners, and Contractors to work safely on standing seam roofs without penetrating the panels. The Standing Seam Roof Anchor (SSRA1). The patented, Non-Penetrating design of the standing seam roof anchor is unlike anything currently available. Its the only certified component system for mounting just about anything to a standing seam roof. The interchangeable mount allows for attachment of devices...

FEATURES: Economical Lightweight Glass Offers Superior Protections Exceeds The ANSI Z87.1-2003 High Velocity Impact Standards CAN/CSA Z94.3-07d

The Tie Down 65087 Hitch Clip is a compact, lightweight roof anchor designed to provide versatile attachment on residential roofs. It uses a keyhole pattern to accept guardrail posts, bunk jacks, and other staging equipment while functioning as a 5,000-lb single anchor point. The product comes ready to install and compatible with wood and metal substrates. Key Features Compact, lightweight powder-coated aluminum designKeyhole pattern supports guardrail posts, staging, and accessoriesRated to...

This Pitch Hood completely covers the face and neck, eliminating the need for pitch crème. Constructed of breathable Dacron fabric, it’s intended for comfort during roofing tasks. Color availability is random and unpredictable. Key features: Full face and neck coverage Eliminates need for pitch crème Made of Dacron fabric Breathable and comfortable Color may vary 

Latex dipped glove with hi-visibility fleece line and black micro-foam latex palm. A 10 gauge high-visibility knitted shell and winter fleece lining support dexterity and warmth, while the knit cuff helps secure the fit. Available in Medium, Large, and X-Large. Key features: His-Vis Fleece Lined Black Latex Palm Hides Dirt Pre-Curved Design Promotes Easy Flexing Comfortable Fit

Pitch Afterburn is a medicated cream designed to provide soothing relief from the effects of pitch burn. It is supplied in a 5.5 oz tube and packaged 24 per box. Key features: Medicated cream for pitch burn relief 5.5 oz tube Packaged 24 per box

The Ridgepro Roof Attachment Tool is the ultimate Roof Safety System. It's been specially designed to get you safely from the ladder to the peak and back. The main body is constructed of high-grade aluminum capable of withstanding thousands of pounds of pulling force. The RIDGEPRO features an adjustable pitch-selection grid with an incremental range of 6/12 to 12/12 with pitches etched into the main body. The two padded cross members protect existing surface material from damage and balance...

The NF300 glove features a white nylon knit shell coated with gray nitrile for added grip. It includes a knit wrist for secure fit and is machine washable. It is marketed for use in bottling, canning, manufacturing, recycling, and assembly settings. Key features: White nylon knit shell Gray nitrile coating for grip Knit wrist design Machine washable Suitable for industrial / assembly tasks ...

The Tie Down 13872 Roofers Spade is a robust tear-off tool built for speed and control in shingle removal. Its 61 inch length offers extended reach, while the 7 × 11 inch blade with wide heel and fulcrum design provides leverage for efficient delamination of roofing layers. Available in serrated or plain edge versions, this spade pairs power with versatility for roofing tear-off tasks. Key Features 61 in overall length for reach and leverage 7 × 11 in blade size for broad coverage Wide heel...

The Guardian Fall Protection Two-Way Standing Seam Roof Anchor (10600) is designed for safe and secure attachment on standing seam metal roof systems. Featuring a two-way tie-off design, it provides dual-direction anchorage for improved mobility and flexibility. Constructed of durable, corrosion-resistant steel, the 10600 anchor clamps directly onto standing seams without penetrating the roof surface, preserving roof integrity. Its reusable design makes it ideal for both temporary and...

This 40 oz Vinyl Tear-Off Tarp is built from durable vinyl-coated fabric rated at 40 oz per square yard. It features criss-cross and plus webbing patterns with 2″ high-strength yellow webbing and heavy steel O-rings, enabling debris loads to be lifted by clevis hook. Custom sizes are available. Additional use includes snow removal. Key features: 40 oz per square yard vinyl-coated fabric 2″ yellow webbing sewn in criss-cross / plus patterns 3″ ID × 3⁄8″ heavy steel O-rings on webbing ends 4,000...

These large gusseted bags protect pallet contents during shipping or on jobsites from dust, dirt, and moisture. The covers are pre-cut and perforated on a roll for fast dispensing, and double as large trash or liner bags. Each roll includes 25 of the 4 ft × 8 ft, 3 mil black covers. Key Features: Gusseted design for full pallet coverage Pre-cut and perforated roll format 3 mil thickness for durability 25 covers per roll ...

This medium duty folding trash chute section is crafted from lightweight, high density polyethylene that is weatherproof and durable. It ships flat and assembles with included chains, bolts, washers, and nuts. Sections sleeve together and are joined with zinc-plated chains. Each unit offers approximately 3'9" usable length and fits a 30" diameter. Ideal for short-term use where portability and easy setup are priorities. Key features: Lightweight HDPE construction Ships flat, easy assembly...

These pallet covers are made of black polyethylene with a thickness of approximately 0.03 mil to protect goods from dust, light moisture, and contact exposure. The covers measure 4 feet by 4 feet and are supplied in rolls of 50. They are lightweight and useful where economical covering is needed. Key features: 4′ × 4′ cover size Black polyethylene material 0.03 mil nominal thickness Supplied in a roll of 50 covers Designed for light protection of palletized goods ...

The Arctic Warmers Caulk Warmer is an insulated warming bag designed to keep caulk and other temperature-sensitive materials warm and ready in cold conditions. It uses an electric heating element combined with thermal-reflective insulation to maintain internal temperatures up to approximately 115°F while outside temperatures are low. This 12-tube capacity warmer helps contractors maintain material usability for adhesives, sealants, grease cartridges, and similar products during cold-weather...

These gusseted, large white pallet covers protect materials from dirt, dust, and moisture during storage or shipping. They come pre-cut and perforated on a roll for fast dispensing and double as large trash or liner bags. Each roll includes 50 covers of nominal dimensions 50″ × 50″ × 74″ with 3 mil thickness. Key Features: Gusseted design for full pallet coverage Pre-cut and perforated roll for easy use 3 mil thickness for durability 50 covers per roll ...

The Red Dragon® RD 6009 Roof Dryers defrost, dry and get you back on the job with minimum effort. Our rugged design and user-friendly features make them the perfect choice for professional roofing contractors. Use them to dry surfaces after ponding water has been removed or to remove morning dew, frost or light debris. The Roof Dryers work by combining high heat (up to 350º F) and a 200 mph airstream to facilitate quick drying and reduce costly downtime. There are no electrical cords or danger...

GreenSlope is a new roofing material made from recycled products designed to reduce the depth of water ponding areas on flat rooftops. Made from Non-Biodegradable materials its built to withstand harsh weathering and last a long time. It's unique properties allow it to be shaped and built up to redirect water towards drainage areas. GreenSlope is easy to work with and can be applied to almost any roof surface, commercial or residential. It can be use around Low Drains, near Scupper and Edges,...

The Guardian Fall Protection CB-12 Roof Anchor (00645) is a versatile, permanent anchorage connector designed for use on wood, steel, or concrete substrates. Built with high-strength welded steel and a durable powder-coated finish, the CB-12 provides a secure tie-off point for fall arrest and restraint systems. Its compact 12-inch design allows easy installation and compatibility with a wide variety of roof structures. Once installed, it delivers a reliable, OSHA- and ANSI-compliant anchor...

These white pallet covers are large gusseted bags designed to protect materials from settling dirt, dust, and moisture during shipping or on job sites. The covers are pre-cut and perforated on a roll for quick dispensing, and they also function as liner or large trash bags. The roll contains 25 covers with actual dimensions of 98 in × 50 in × 76 in and a thickness of 3 mil. Key Features: Gusseted design for full wrap around pallet Pre-cut, perforated roll format for easy dispensing 3 mil...

#3 heel has become the most popular heel of choice Heel measures 6” x 11”, covers and reinforces 80% of the spade Head 7” wide x 11” long 48” Wood handle

Grain pigskin, red fleece lined work glove (Item # 337-WL105L) offers a soft leather exterior with fleece insulation for added warmth. Key features: Grain pigskin leather exterior Red fleece lining Work glove design

The Tie Down 13874 Serrated Roofers Spade is a heavy-duty tear-off tool expertly built for fast roof material removal. Its 7 in × 11 in serrated blade and wide heel with fulcrum design allows strong engagement with shingles and nails. At 61 in overall length and weighing 10 lb, it provides excellent reach and leverage for roofing work. Key Features Serrated 7 in × 11 in blade for enhanced cutting performance Wide heel and fulcrum design to aid in prying and leverage 61 in total length gives...

These white canvas gloves are made from 8 oz cotton with a knit wrist and feature black PVC dots on the palm and index finger for improved grip. The dotting provides additional traction when handling materials, making them useful for tasks where slip resistance is beneficial. Key features: 8 oz cotton build with knit wrist Slip-resistant surface on gripping zones Standard glove style with canvas backing

The Arctic Warmers 20 lb Cylinder Warmer Wrap is an insulated heating wrap for 20 lb propane or foam cylinders. It uses a heat-reflective flexible barrier and closed-cell insulation inside a heavy-duty nylon shell to help maintain consistent warmth around the cylinder in cool or cold conditions. The wrap features adjustable Velcro closures and cinch straps for a secure fit and includes a cord storage pocket for organized jobsite setup. Key Features Designed to fit 20 lb propane or foam...

This 5 ft metal flex hose is listed as a kettle accessory for roofing equipment. It includes a 1½-inch male fitting on one end. The item is shown with product number 277-1015 on the Big Rock Supply page. Key features: 5 ft length Flexible metal hose construction 1½-inch male fitting on one end Roofing kettle accessory Listed as item 277-1015

These clear clean-up bags hold 42 gallons and measure 32" x 50". They are made of heavy 3 mil gauge material. This pack includes 20 bags for contractor or commercial use. Key features: 42 gallon capacity Heavy 3 mil gauge thickness Clear color Dimensions: 32" x 50" Pack of 20

This breathable pallet cover measures 4 ft × 8 ft using 3 mil film material. The sides are micro-perforated to allow airflow and reduce moisture. It features a blackout design (white outside, black inside) and is UV treated for sun protection. Key features: Micro-perforated on all four sides for breathability White/outside, black/inside (“blackout”) design UV treated film for protection Made of 3 mil thickness Water, tear, chemical resistant and rot proof ...

The Arctic Warmers 5-Gallon Pail Warmer is an insulated wrap designed to maintain consistent internal temperatures for materials stored in standard 5-gallon buckets or pails. It combines a heat-retaining flexible barrier with durable insulation and an automatic thermostat to help keep adhesives, coatings, and other temperature-sensitive materials workable in cold weather. This warmer wraps securely around the container and can be powered from a standard 120 V AC outlet or a 12 V DC inverter...

#3 heel has become the most popular heel of choice Heel measures 6” x 11”, covers and reinforces 80% of the spade Head 7” wide x 11” long 48” Wood handle

FEATURES: Economical Lightweight Glass Offers Superior Protections Exceeds The ANSI Z87.1-2003 High Velocity Impact Standards CAN/CSA Z94.3-07

The American made SnoBlox Deuce has revolutionized the polycarbonate snow guard industry with its low profile forward mounted 2.5" high face and its sleek 1.5" wide waffled tapered back base that fits most roof panels without rib straddling. This patented product has stood the test of time and is an aesthetically appealing, low cost solution to the problem of sliding snow and ice on metal roofing. It's mounting versatility allows it to be mechanically attached on screw down roofs with a 1.5"...

Ensure safety and compliance on your worksite with Spar-Marathon's Warning Line System. This system is engineered to provide quick setup and reliable protection. Key Features: OSHA Compliant: Meets OSHA Standard 29 CFR 1926.502(f) to ensure workplace safety.Effortless Setup: Designed for quick and easy installation, saving you time and labor costs.Portable and Lightweight: Each stand weighs just 34 lbs., making it easy to transport and set up on site.Flexible Configuration: Recommended spacing...

DeWitt’s 911 Emergency Roof Patch is a contractor-grade powder formulated to provide a temporary, leak-proof seal on flat roofs during emergency conditions. The natural mineral compound expands to a gel on contact with water, helping stop leaks on built-up roofs quickly — even in inclement weather or standing water. This product can be applied directly from the pail over suspected leak areas without special tools, and it continues to seal as long as it remains wet. When conditions allow,...

Compact, accurate, and easy to carry—the Keson RR112 RoadRunner is your grab-and-go wheel for fast distance takes on pavement, compacted soil, gravel, and short turf. A smooth-rolling wheel and top-mounted counter make readings effortless, while the trigger reset at the handle speeds re-measures. The foldable shaft, debris scraper, and kickstand keep it tidy and ready between pulls—perfect for estimating, layout, striping, landscaping, utilities, and general construction. Key Features...

The 5 ft × 5 ft LD (light-duty) drain tarp from Big Rock Supply (Item # 329-DT-PC-0505) is designed for quick response roof or ceiling leaks, or leak-prone areas that need short-term diversion. It features a drain spout that connects to a standard ¾″ garden hose to channel water safely away from personnel and equipment. The fabric is 12-mil reinforced polyethylene and is not flame retardant. Heavy D-rings are sewn into each corner to assist hanging and anchoring. Key features: Drain spout...

The Tie Down 48579 Wedgie is a lightweight roofing accessory designed to keep shingles secure during installation by preventing them from sliding off. It is fabricated from durable polyurethane foam and supports up to 120 lb load per pad. With dimensions of 7 × 7 in and weighing approximately 2 lb, the Wedgie is easy to place under shingle tabs row by row and is ideal for maintaining roof alignment and reducing waste. Key Features Polyurethane foam construction for durability and lightweight...

ChemLink SnowShoe Snow Guards are an adhesive-applied snow retention accessory used to help reduce sudden snow and ice slides off pitched roofs. They’re molded from a durable polycarbonate polymer and are used on a wide range of roof surfaces, including metal, slate, tile, and single-ply membranes. Each carton includes 24 snow guards and the adhesive needed for installation. SnowShoe guards are available in multiple color options for a cleaner finished look on the roof. Key Features...

The RACE Safety Orange Skylight Net fits over raised-lip skylights or hatch openings with a minimum 2″ vertical lip surface. It is designed to contain a 1,000 lb load. The net is made from safety orange 1-1/2″ high tenacity polypropylene (HTPP) using a 4″ square mesh and reinforced with sewn rope borders. The net includes a 1-1/2″ green web strap with an attached ratchet for securing around the skylight frame. Key features: Fits skylights or hatches with at least 2″ vertical lip Contains a...